It works well with quarry tiles, terracotta; slate, stone, unpolished marble, porcelain, terrazzo and cement floors. It can even be used in wet areas, making it ideal for bathroom tiles. Unlike many sealers, Mattstone is easy to apply and cost effective solution to protect tiles.
Coverage:
- Lower porosity floors - approximately 1-2 litres per 10m2 of floor
- Higher porosity floors - approximately 3-4 litres per 10m2 of floor
Want a natural matt finish to your tiles? Then LTP Mattstone Impregnating Tile sealer is for you. It's a great way to protect your tiles from daily battles such as staining from coffee, wine and other household liquids.
It works well with quarry tiles, terracotta; slate, stone, unpolished marble, porcelain, terrazzo and cement floors. It can even be used in wet areas, making it ideal for bathroom tiles. Unlike many sealers, Mattstone is easy to apply and cost effective solution to protect tiles.
Coverage:
- Lower porosity floors - approximately 1-2 litres per 10m2 of floor
- Higher porosity floors - approximately 3-4 litres per 10m2 of floor
Hello, The Carrara Marble is a harder natural stone than most other stone ranges like Limestone and Travertine, this means it is a low porosity natural stone.
Is Mattstone suitable on Hearth below Woodburner which will throw out a fair bit of heat
Hello, The LTP Mattstone sealer we supply is suitable to use with our tiles, our tiles can be used as a hearth as long they are not in direct contact with a naked flame. I hope this has been helpful.
How long does this take to dry please? Is the idea that I would lay my tiles on the floor ready for grouting, I would then put one layer of this on, and then leave it to set before I would grout?
Hello, Thank you for your question. The drying time is approx 30 minutes, however, the bottle will have more detailed information on this. It is recommended you wait for the first coat to dry before applying the second coat, it is possible to grout tiles in between the first and 2nd coat application. I hope this has been helpful.
Brazilian black slate ... Will it need more than 1 coat ?
Hello, Thank you for your question. We recommend sealing our natural stone twice, once before grouting and once after and then every 6-12 months, I hope this has been helpful
Hi, once opened how long would this product still be useable, for example if I need it re done in a few years please?
Hello, we hope you are well. Tile sealer, once opened, can be useable for up to 4 years. We hope this is helpful.
Is this the preferred one for limestone, or should I use your other product?
Hello Christopher, rather than stone types, these sealers are manufactured to be suitable for certain stone finishes like polished or honed/matt finish. This particular sealer is suitable for any honed or matt finish natural stones. We hope this is helpful.
Hi, does this sealer darken the tile or dry as invisible?
Hello Andrew, our matt stone sealer does not darken the stones or change their appearance in any way. Initial application may seem that way as with anything that gets wet however, this soon embeds and dissipates to show the natural tone of the stone itself.
Hi, the instructions say 3-4 coats are needed for highly porous floors and 2 coats for floors with low porosity. Can you please advise: Are the honed Carrara marble tiles low- or high-porosity? Thank you!